HC Valley batteries offer the highest energy yield of all Valley IV battery types. Ark Knight EndfieldAnd selling to locals is also quite profitable. However, this value is offset by relatively complex production chains that require high-quality materials and huge amounts of raw materials. hereto endfield Guide, we will share the HC Valley battery factory design with you to help you get inspiration for your own factory.
All Depot Node Locations in Arknights Endfield (How to Upgrade Storage)
Unlocking depot nodes will help Endmin increase your local storage in Arknights: Endfield.
Arknights Endfield HC Valley Battery Blueprint Due to the large scope of this build, we cannot share just one blueprint, so we have split the shared code into two (valid for Asian servers): EFO01E50O51e69o563uIa (1/2) and EFO01521429A0auaaeIoe (2/2)
Similar to Buck Capsule (A) layout. This setup for the HC Valley battery covers a significant portion of the core AIC's main area.But this time the direction will be wider, not longer. This build requires:
-
19 bus unloader outputs
-
12 Originium Ore
-
3 sand flower
-
4 steel parts
-
-
15 Crushing device
-
6 grinding units
-
2 packaging units
-
4 thermoses
-
Protocol storage for excess materials
You'll want to keep an eye on originium and ferrium ore production. HC Valley batteries require a ton of these and may be lacking somewhere.This led to a complete halt in production. Sandleaf, on the other hand, is very easy to produce.
Thankfully, All we have to worry about is producing dense Originium powder and steel parts.Because the rest will be baked into the production line for both.
What about steel parts production?
If you still have enough space around the primary core or sub-PACs on Outposts, you can copy the layout above to fully utilize the three additional output ports provided by the core. The design is quite compact and there will be plenty of space in the center of the base as well. (Unless used in planting units). The order is as follows:
-
Set two output ports to Ferrium Ore and the third port to Sandflower Powder.
-
Connect the Ferrium Ore conveyor line to the purification unit.
-
Connect the refining unit to the crushing unit.
-
Connect the grinding unit and sandflower powder belt to the grinding unit.
-
Connect the grinding unit to the new refining unit.
-
Connect the new purification device to the fitting device
-
Reconnect the belt to one of the input ports on the primary core or to the protocol storage compartment.
steel blueprint
Shared code (Asia): EFO0101Oa14o2Ei0E179
If there is no space around the base core, Connect to the Depot Bus using the diagram above.. However, only steel is produced, so to craft steel parts, attach a Smelting Unit, Fitting Unit, and Storage Bin to the end of the production line.
